ARIFIN, FATAHUL and Wang, Min-Wen and Vu, Van-Hanh (2019) The Study of Optimal Molding of a LED Lens with Grey Relational Analysis and Molding Simulation. Periodica Polytechnica Mechanical Engineering. pp. 278-294.
|
Text (Similarity)
International_paper_5_(Grey_Analisys)[1].pdf Download (7MB) | Preview |
Abstract
Injection molding technology is known as the most widely used method in mass production of plastic products. To meet the quality requirements, a lot of methods were applied in optimization of injection molding process parameter. In this study the optimization based on Taguchi orthogonal array and Grey relational analysis (GRA) is used to optimize the injection molding process parameters on a LED lens. The four process parameters are: packing pressure, injection speed, melt temperature and mold temperature. The multiresponse quality characteristics are total displacement, volumetric shrinkage, and thermal residual stress. The optimal molding parameters are packing pressure (90 MPa), injection speed (300 mm/sec), melt temperature (270 °C) and mold temperature (90 °C). The luminous uniformity of the LED is 92.61 % and the viewing angle of the LED is 124.76°. Among the four factors, packing pressure plays the key role in reducing total displacement, volumetric shrinkage, and thermal residual stress.
| Item Type: | Article |
|---|---|
| Subjects: | T Technology > TJ Mechanical engineering and machinery |
| Divisions: | Mechanical Engineering > Journal |
| Depositing User: | Mrs Trisni Handayani |
| Date Deposited: | 08 Nov 2022 07:52 |
| Last Modified: | 08 Nov 2022 07:52 |
| URI: | http://eprints.polsri.ac.id/id/eprint/12083 |
Actions (login required)
 |
View Item |
