PRABOWO, ADI (2015) ANALISA KEDIP TEGANGAN AKIBAT PENGASUTAN MOTOR PM-002 PADA SS 16 A 12 KV/6.6 KV DI PT PERTAMINA (PERSERO) RU III PLAJU PALEMBANG. Other thesis, Politeknik Negeri Sriwijaya.
Full text not available from this repository.Abstract
Voltage Dips is a drop in the voltage value between 0.1 - 0.9 pu for a duration of 0.5 cycles - 1 minute. This voltage flicker occurs because of the starting of the motor which also increase the value of a current of 5-7 times the nominal current value. The motors are in asut in this case is the motor PM-002 is a motor with high voltage reaches 6.6 kV that are on line at SS 16 A high voltage power distribution network and the need for calculation of voltage flicker occurs. both large current calculation and calculation of the value of the pulsating voltage in volts and in the unit “pu” (per unit) which is adapted to the conditions that cause the motor start voltage flicker. On the results of the calculation of the value of the starting current, the voltage on the big blink SS 16 A 6.6 kV networks each - each are as follows: 87.60 A for the value of the starting current, 0.87 pu or 5807.9 Volt for great value voltage flicker. The duration of the voltage flicker was analyzed for 6 seconds it means tergolomg in voltage flicker TEMPORARY (3 seconds - 1 minute). Keywords: substation, High Voltage Motor, Wink Voltage
| Item Type: | Thesis (Other) |
|---|---|
| Uncontrolled Keywords: | substation, High Voltage Motor, Wink Voltage |
| Subjects: | T Technology > TK Electrical engineering. Electronics Nuclear engineering |
| Divisions: | Electrical Engineering > Undergraduate Theses |
| Depositing User: | Mrs Trisni Handayani |
| Date Deposited: | 18 Nov 2015 08:07 |
| Last Modified: | 18 Nov 2015 08:07 |
| URI: | http://eprints.polsri.ac.id/id/eprint/1715 |
Actions (login required)
 |
View Item |
