 | Up a level |
Zamheri, Ahmad and ARIFIN, FATAHUL and Kusumanto, RD and Bow, Yohandri and Rusdianasari, Rusdianasari and Wang, Min-Wen and Susandi, Afries and Herlambang, Yusuf Dewantoro (2021) MODELLING DESIGN DIFFUSER HORIZONTAL AXIS WIND TURBINE. Forum In Research, Science and Technology (FIRST). pp. 193-196. ISSN 2461-0739
ARIFIN, FATAHUL and Seprianto, Dicky and Firdaus, - (2021) Effect of Holding Time, Grain Size and Compacting Pressure Parameters Against Compressive Strength of Aluminium -5% Fly Ash. Advanced Materials Research.
ARIFIN, FATAHUL and Susandi, Afries and Kusumanto, RD (2021) Simulation of Diffuser Parameters in The Performance of Horizontal Axis Wind Turbine Using Computational Fluid Dynamics. Technology Reports of Kansai University, 63 (6). pp. 7739-7749. ISSN 04532198
ARIFIN, FATAHUL and Iskandar, - and Azharuddin, - (2021) Taguchi Method Approach to Optimize Manufacturing Process Parameters of Aluminium -5% Fly Ash Alloy Using Powder Metallurgy. Advanced Materials Research, 576. pp. 284-288.
Susandi, Afries and ARIFIN, FATAHUL and Kusumanto, RD (2021) Simulation of Diffuser for Horizontal Axis Wind Turbine using Computational Fluid Dynamics. World Conference on Applied Science, Engineering & Technology. p. 29. ISSN ISBN : 978-93-90214-10-5
ARIFIN, FATAHUL and Gharmana, Adhi and Rusdianasari, - (2021) CFD Analysis for Combination Savonius and Darrieus Turbine with Differences in The Number of Savonius Turbine Blades. International Conference on Artificial Intelligence and Mechatronics Systems (AIMS).
ARIFIN, FATAHUL (2021) Coresponding Channel Mechanical. Jurnal Machine Universitas Bangka Belitung.
ARIFIN, FATAHUL (2021) NUMERICAL ANALIYSIS OF PHENOMENA TRANSPORT OF PROTON EXCHANGE MEMBRAN (PEM) FUEL CELL. Journal Heat Transfer.
ARIFIN, FATAHUL and Herlambang, Yusuf Dewantoro and Kurnianingsih, - and Prasetyo, Totok and Roihatin, Anis (2021) Numerical Analysis of Phenomena Transport of a Proton Exchange Membrane (PEM) Fuel Cell. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 80. pp. 127-135. ISSN 2289-7879
ARIFIN, FATAHUL (2021) OPTIMIZATION OF PROCESS PARAMETERS IN 3D PRINTING FDM BY USING THE TAGUCHI AND GREY RELATIONAL ANALYSIS METHODS. Jurnal Universitas Muhammadiyah Jakarta.
ARIFIN, FATAHUL and Sundari, Ella (2020) DISAIN MANUFATUR JIG AND FIXTURE RAGUM BOR DENGAN SUDUT KEMIRINGAN 45 DERAJAT. National Conference of Industry, Engineering and Technology - Semarang, 1. ISSN e ISSN 2746 - 0975
ARIFIN, FATAHUL and FRANANDO, - and SYAHPUTRA, ANGGA PANJY and APRIANSYAH, ICVAN (2020) DISAIN MESIN-MESIN INDUSTRI KAIN TRADISIONAL DI TUAN KENTANG PALEMBANG. In: DISAIN MESIN-MESIN INDUSTRI KAIN TRADISIONAL DI TUAN KENTANG PALEMBANG. CITRABOOKS. ISBN 978-602-7568-74-4
Putri, Fenoria and ARIFIN, FATAHUL and Iskandar and Mulyadi and Suparjo and Franando and Herlambang, Yusuf Dewantoro (2020) Optimization of Stroke Rehabilitation Hand Component of 3D Printing With Taguchi Method Approach. Forum In Research, Science and Technology (FIRST) - Atlantis Highlights in Engineering. pp. 123-128. ISSN 2461-0739
ARIFIN, FATAHUL and Seprianto, Dicky and Franando, - and SYAHPUTRA, ANGGA PANJY (2020) RANCANGAN BAGIAN-BAGIAN MESIN-MESIN TENUN KAIN DI INDUSTRI KAIN TUAN KENTANG. In: RANCANGAN BAGIAN-BAGIAN MESIN-MESIN TENUN KAIN DI INDUSTRI KAIN TUAN KENTANG. CITRABOOKS. ISBN 978-6027568-73-0
ARIFIN, FATAHUL and Zamheri, Ahmad and Martomi, Eka Satria and Herlambang, Yusuf Dewantoro and SYAHPUTRA, ANGGA PANJY and APRIANSYAH, ICVAN and FRANANDO, - (2020) Optimization of Process Parameters in 3D Printing FDM by Using The Taguchi and Grey Relational Analysis Methods. Jurnal Ilmiah Teknik Mesin. pp. 1-10. ISSN 2088 - 9038
ARIFIN, FATAHUL and Arnoldi, Dwi and Sundari, Ella and Putri, Fenoria and AGASA, FEBY and Ramadhan, Yudha and SUSETYO, GUSTAF and Herlambang, Yusuf Dewantoro (2020) Studi Analisis Simulasi Kekuatan Beban pada Alat Bantu Pembuatan Lubang dengan Sudut Kemiringan 45 Derajat. Jurnal Polimesin, 18 (2). pp. 116-123. ISSN print: 1693 - 5462 online: 2549 - 1199
ARIFIN, FATAHUL (2020) DISAIN MANUFATUR JIG AND FIXTURE RAGUM BOR DENGAN SUDUT KEMIRINGAN 45 DERAJAT. National Conference of Industry, Engineering, and Technology (NCIET).
ARIFIN, FATAHUL and Sundari, Ella (2020) Disain Manufatur Jig and Fixture Ragum Bor dengan Sudut Kemiringan 45 Derajat. National Conference of Industry, Engineering and Technology - Semarang, 1. ISSN e ISSN 2746 - 0975
ARIFIN, FATAHUL and Herlambang, Yusuf Dewantoro and Kurnianingsih and Roihatin, Anis (2020) MODEL EXPERIMENTAL OF PHOTOVOLTAIC-ELECTROLYZER FUEL CELLS AS A SMALL-SCALE POWER. Journal of Physics: Conference Series. pp. 1-9. ISSN 17426588, 17426596
ARIFIN, FATAHUL and Putri, Fenoria and Iskandar and Mulyadi and Suparjo and Franando and Herlambang, Yusuf Dewantoro (2020) OPTIMIZATION OF STROKE REHABILITATION HAND COMPONENT OF 3D PRINTING WITH TAGUCHI METHOD APPROACH. Forum In Research, Science and Technology (FIRST) - Atlantis Highlights in Engineerin, 7. pp. 123-128. ISSN 2461-0739
ARIFIN, FATAHUL and Putri, Fenoria and Iskandar, - and Mulyadi, - and Suparjo, - and Franando, - (2020) Optimization of Stroke Rehabilitation Hand Component of 3D Printing with Taguchi Method Approach. Forum In Research, Science and Technology (FIRST) - Atlantis Highlights in Engineering, 7. pp. 123-128. ISSN 2461-0739
ARIFIN, FATAHUL (2020) Studi Analisis Kekuatan Jig and Fixture Bor 45 Derajat. POLIMESIN.
Wang, Min-Wen and ARIFIN, FATAHUL and Kuo, Hong-Lin (2019) Study on Micromoulding of A High Viewing Angle LED Lens. The Institute of Materials, Minerals and Mining. pp. 1-11. ISSN 1465-8011 (Print) 1743-2898 (Online)
ARIFIN, FATAHUL and Wang, Min-Wen and Kuo, Hong-Lin (2019) Study on Micromoulding of A High Viewing Angle LED Lens. The Institute of Materials, Minerals and Mining. ISSN 1465-8011 (Print) 1743-2898 (Online)
ARIFIN, FATAHUL and Wang, Min-Wen and Kuo, Hong-Lin (2019) Study on micromoulding of a high viewing angle LED lens. The Institute of Materials, Minerals and Mining. pp. 1-11. ISSN 1465-8011 (Print) 1743-2898 (Online)
ARIFIN, FATAHUL and Wang, Min-Wen and Kuo, Jhen-Wei and Dzwo, Tzong-Horng (2019) OPTIMAL DESIGN OF PLASTICIZING SCREW USING ARTIFICIAL INTELLIGENT APPROACH. Forum In Research, Science and Technology (FIRST) - Atlantis Highlights in Engineerin. pp. 1-7. ISSN 2461-0739
Wang, Min-Wen and ARIFIN, FATAHUL and Vu, Van-Hanh (2019) The Study of Optimal Molding of a LED Lens with Grey Relational Analysis and Molding Simulation. Periodica Polytechnica Mechanical Engineering. pp. 278-294.
ARIFIN, FATAHUL and Wang, Min-Wen and Vu, Van-Hanh (2019) The Study of Optimal Molding of a LED Lens with Grey Relational Analysis and Molding Simulation. Periodica Polytechnica Mechanical Engineering. pp. 278-294.
Wang, Min-Wen and ARIFIN, FATAHUL and Huang, Jyun-Yan (2019) OPTIMIZATION OF THE MICRO MOLDING OF A BICONCAVE STRUCTURE. International Journal of Technology. pp. 269-279. ISSN 2086-9614
ARIFIN, FATAHUL and Wang, Min-Wen and Huang, Jyun-Yan (2019) OPTIMIZATION OF THE MICRO MOLDING OF A BICONCAVE STRUCTURE. International Journal of Technology. pp. 269-279. ISSN 2086-9614
ARIFIN, FATAHUL (2019) Coresponding dengan Plastik Rubber. Rubber and Composites Journal.
ARIFIN, FATAHUL and Herlambang, Yusuf Dewantoro and Prasetyo, Totok and Roihatin, Anis and Safarudin, Y M (2019) HYBRID POWER PLANT OF THE PHOTOVOLTAIC-FUEL CELL. International Conference on Innovation in Science and Technology.
ARIFIN, FATAHUL and Herlambang, Yusuf Dewantoro and Prasetyo, Totok and Roihatin, Anis and Safarudin, - and Arifin, - (2019) Hybrid Power Plant of The Photovoltaic-Fuel Cell. International Conference on Innovation in Science and Technology (ICIST). pp. 1-9.
ARIFIN, FATAHUL and Wang, Min-Wen and Kuo, Jhen-Wei and Dzwo, Tzong-Horng (2019) Optimal Design of Plasticizing Screw Using Artificial Intelligent Approach. Journal of Physics: Conference Series. pp. 1-7. ISSN 17426588, 17426596
ARIFIN, FATAHUL (2019) Optimal Design of Plasticizing Screw Using Taguchi Method and Artificial Intelligent Approach. FIRST.
ARIFIN, FATAHUL and Wang, Min-Wen and Huynh, Thi Truc-Ngan (2018) OPTIMIZATION OF MOLDING PARAMETERS FOR A MICRO GEAR WITH TAGUCHI METHOD. Forum In Research, Science and Technology (FIRST). ISSN 2461-0739
Wang, Min-Wen and Chen, Chao-Hsien and ARIFIN, FATAHUL and Jr Lin, Jian (2018) Modeling and Analysis of Multi-Shot Injection Molding of Blu-ray Objective Lens. Journal of Mechanical Science and Technology. pp. 4839-4849.
ARIFIN, FATAHUL and Wang, Min-Wen and Chen, Chao-Hsien and Lin, Jian-Jr (2018) Modeling and analysis of multi-shot injection molding of Blu-ray objective lens. Journal of Mechanical Science and Technology. pp. 4839-4849.
ARIFIN, FATAHUL and Wang, Min-Wen and Chen, Chao-Hsien and Jr Lin, Jian (2018) Modeling and Analysis of Multi-Shot Injection Molding of Blu-ray Objective Lens. Journal of Mechanical Science and Technology. pp. 4839-4849.
ARIFIN, FATAHUL (2018) OPTIMIZATION MICRO MOLDING OF A BICONCAVE STRUCTURE. International Journal of Technology (IJTech).
ARIFIN, FATAHUL and Wang, Min-Wen and Huynh, Thi Truc-Ngan (2018) Optimization of Molding Parameters for a Micro Gear with Taguchi Method. Journal of Physics: Conference Series. pp. 1-6. ISSN 1742-6596
ARIFIN, FATAHUL (2018) Optimization of Molding Parameters for a Micro Gear with Taguchi Method. 2nd FIRST International Conference 2018 (Forum in Research, Science, and Technology).
ARIFIN, FATAHUL (2018) Study of Optimal Molding of A LED Lens with Grey Relational Analysis and Molding Simulation. Periodica Polytechnica Mechanical Engineering.
ARIFIN, FATAHUL and Azharuddin, - (2013) The Excellences of Exoskeletons for Medical Equipment. AUSTENIT, 5 (1).
ARIFIN, FATAHUL (2013) THE ADVANTAGES OF MODEL 4807A HIGH RESOLUTION ACCELEROMETER. National Kaohsiung University of Applied Sciences (N.K.U.A.S). pp. 19-22.
ARIFIN, FATAHUL (2012) ADVANCES IN MANUFACTURING AND MATERIALS ENGINEERING. ICAMME.
ARIFIN, FATAHUL (2011) DISAIN PROGRAM PERHITUNGAN KAPASITAS PENDINGIN UNTUK BANGUNAN GEDUNG DENGAN MENGGUNAKAN SOFTWARE VISUAL BASIC 6.0. Proceediing Forum Ilmiah Nasional. pp. 38-45. ISSN 978-602-19568-0-9
ARIFIN, FATAHUL (2011) DISAIN KAPASITAS PENDINGIN UNTUK BANGUNAN GEDUNG DENGAN MENGGUNAKAN SOFTWARE VISUAL BASIC 6.0. Forum Ilmiah Nasional. pp. 38-45.
ARIFIN, FATAHUL (2011) Pemanfaatan Limbah Serbuk Besi untuk Bahan Selubung Ruang Bakar Kompor Bio-Mass Tipe Roket. AUSTENIT, 3 (1). pp. 1-8.
ARIFIN, FATAHUL and Seprianto, Dicky (2010) DASAR-DASAR SOLID MODELING MENGGUNAKAN AUTODESK INVENTOR PROFESSIONAL 2010. In: DASAR-DASAR SOLID MODELING MENGGUNAKAN AUTODESK INVENTOR PROFESSIONAL 2010. Tunas Gemilang Press. ISBN 978-602-8816-35-9
ARIFIN, FATAHUL MOLDING ANALYSIS OF MULTI-SHOT INJECTION MOLDING OF BLU RAY OBJECTIVE LENS. Journal of Mechanical Science and Technology.
ARIFIN, FATAHUL and Herlambang, Yusuf Dewantoro and Kurnianingsih, - and Roihatin, Anis Model Experimental of Photovoltaic-Electrolyzer Fuel Cells as a Small Scale Power. IOP Publishing.
ARIFIN, FATAHUL and Gunawan, Indra and Azharuddin, - and Ramadona, Ongki Penerapan Autodesk Inventor dalam Mendisain Mesin Gulung Benang di Kerajinan Tuan Kentang Palembang. Seminar Nasional Aplikasi Teknologi pada Masyarakat (SNAPTEKMAS). pp. 118-123.
